babettaboss pull starter adapter

The babettaboss pull starter adapter is designed for installing a pull starter on the ignition side of the engine. It replaces the original plastic cover and enables easier engine starting using a recoil starter mechanism. A babettaboss sticker is included with the adapter.

The adapter has the babettaboss logo printed on the side.

The adapter is made from heat-resistant ASA material, suitable for use near the engine. Installation requires drilling two mounting holes into the crankcase.

Features:

• Compatible with Babetta 207, 210, 215
• babettaboss logo printed on the side
• Enables pull starter installation on the ignition side
• Replaces the original plastic cover
• Made from heat-resistant ASA material
• bbttagroup x babettaboss collaboration product

🔩 Mounting hardware:
Mounting screws are not included. Recommended hardware to purchase separately:

• 2× M6×60 screws
• 4× M5×20 countersunk screws *
• 2× M6 nuts
• 4× M6 washers
• 4× M5 washers
• 4× M5 nuts

🔩 * Countersunk screws:
The installation video is to be followed. The four M5×20 countersunk screws that hold the pull starter to the adapter are fitted from the inside outwards, so that no thread protrudes towards the ignition coils. A protruding thread can damage the coils on the engine as well as the adapter itself.

🔩 Babetta 207:
The adapter physically fits the 207 as well, but once it is installed the pedal cranks can no longer be rotated all the way round.

🔩 Note:
The pull starter mechanism is not included and is sold separately. Installation requires modification of the crankcase and is intended for users with mechanical experience.

🎥 Installation video:
https://youtube.com/shorts/BAR1n_y45MM